Car Paint Restoration
Restoring paint means correcting the surface rather than replacing it. If enough clear coat remains, a careful cut and polish removes oxidation, swirls and light scratches and brings back depth. If it does not, we say so before you spend money on polish that cannot work.
From AED 999Written quote after diagnosis, before work startsConvenience fee applicable · shown on your written quote
- 1 to 3 days
- Pickup and delivery from your door
- Convenience fee applicable · shown on your written quote
- Diagnosis free with repair
How we do car paint restoration
- 1
Wash, decontaminate and inspect
The car is washed, then treated to remove tar and embedded iron particles. Under strong light we assess the damage panel by panel.
- 2
Measure what is left
A paint thickness gauge tells us how much clear coat remains. This is the deciding fact: thin areas can only take a gentle polish.
- 3
Test a section
We try different pads and compounds on a small area to find the gentlest combination that works, and show you the result before continuing.
- 4
Machine correct the paint
Panels are cut and refined in stages. Edges and body lines are protected because paint is thinnest there.
- 5
Protect the finish
A sealant or coating is applied to slow down the next round of fading, and we explain how to wash the car safely.
Signs it is time
- Colour looks flat and chalky, particularly on the bonnet, roof and boot lid
- Light reflections look cloudy, with a haze that washing does not shift
- Fine circular marks visible in the sun, left by automatic car-wash brushes
- Water spots etched into the paint after sprinklers or rain left to dry
- A rough, sandy texture when you run a hand across the paint after washing
- Red, black or dark blue panels that have turned pale or pinkish
What usually causes it
Oxidation of the clear coat
Sun, heat and pollution slowly break the top surface of the lacquer into a rough, dull skin. It scatters light instead of reflecting it, so the colour appears faded even though it is still there beneath.
Micro-scratches from poor washing
Dry wiping dust off a car, or using dirty brushes, grinds sand across the surface. Thousands of tiny scratches create the swirl pattern that shows in direct light.
Mineral deposits
Hard water and sprinkler spray leave minerals that bake onto the paint in the heat, etching the clear coat if left.
Colours that fade faster
Some pigments, especially reds and certain solid colours on older cars, break down quicker under UV than silver or white.
In Dubai, Sharjah and Ajman
In the Gulf, restoration works best when it is done early. A clear coat that is merely dull can be saved, whereas one that has begun to flake cannot, and that stage can arrive within a single summer. Cars that have spent years parked outside near the coast also collect salt, which accelerates the damage, so a regular gentle wash is part of the aftercare we recommend.
Questions about car paint restoration
How do I know if my paint can be restored?
If the surface is dull but smooth and the clear coat is intact, restoration usually works. If it is peeling, cracked or has bare colour showing, restoration cannot help.
Is this the same as a polish?
Polishing is part of it, but restoration starts with measuring and decontaminating. See the car polish pages for a lighter, shine-only service.
How long will the result last?
It depends on how the car is parked and washed. Under cover and with gentle washing, years. Parked outside all summer, the protection layer needs renewing sooner.
Will you remove deep scratches?
Scratches that you can catch with a fingernail go through the clear coat and need paint repair, not polishing. We point those out when we assess.
Last updated
Get a written quote
Tell us about your car. You get an itemised quote before any work starts, and you choose OEM, aftermarket or used parts.